ModemManager.GdbusModem¶

Implementations:
	`ModemManager.GdbusModemProxy`, `ModemManager.GdbusModemSkeleton`

Methods¶

class	`interface_info` ()
class	`override_properties` (klass, property_id_begin)
	`call_command` (arg_cmd, arg_timeout, cancellable, callback, *user_data)
	`call_command_finish` (res)
	`call_command_sync` (arg_cmd, arg_timeout, cancellable)
	`call_create_bearer` (arg_properties, cancellable, callback, *user_data)
	`call_create_bearer_finish` (res)
	`call_create_bearer_sync` (arg_properties, cancellable)
	`call_delete_bearer` (arg_bearer, cancellable, callback, *user_data)
	`call_delete_bearer_finish` (res)
	`call_delete_bearer_sync` (arg_bearer, cancellable)
	`call_enable` (arg_enable, cancellable, callback, *user_data)
	`call_enable_finish` (res)
	`call_enable_sync` (arg_enable, cancellable)
	`call_factory_reset` (arg_code, cancellable, callback, *user_data)
	`call_factory_reset_finish` (res)
	`call_factory_reset_sync` (arg_code, cancellable)
	`call_list_bearers` (cancellable, callback, *user_data)
	`call_list_bearers_finish` (res)
	`call_list_bearers_sync` (cancellable)
	`call_reset` (cancellable, callback, *user_data)
	`call_reset_finish` (res)
	`call_reset_sync` (cancellable)
	`call_set_current_bands` (arg_bands, cancellable, callback, *user_data)
	`call_set_current_bands_finish` (res)
	`call_set_current_bands_sync` (arg_bands, cancellable)
	`call_set_current_capabilities` (arg_capabilities, cancellable, callback, *user_data)
	`call_set_current_capabilities_finish` (res)
	`call_set_current_capabilities_sync` (arg_capabilities, cancellable)
	`call_set_current_modes` (arg_modes, cancellable, callback, *user_data)
	`call_set_current_modes_finish` (res)
	`call_set_current_modes_sync` (arg_modes, cancellable)
	`call_set_power_state` (arg_state, cancellable, callback, *user_data)
	`call_set_power_state_finish` (res)
	`call_set_power_state_sync` (arg_state, cancellable)
	`complete_command` (invocation, response)
	`complete_create_bearer` (invocation, path)
	`complete_delete_bearer` (invocation)
	`complete_enable` (invocation)
	`complete_factory_reset` (invocation)
	`complete_list_bearers` (invocation, bearers)
	`complete_reset` (invocation)
	`complete_set_current_bands` (invocation)
	`complete_set_current_capabilities` (invocation)
	`complete_set_current_modes` (invocation)
	`complete_set_power_state` (invocation)
	`emit_state_changed` (arg_old, arg_new, arg_reason)

Virtual Methods¶

	`do_handle_command` (invocation, arg_cmd, arg_timeout)
	`do_handle_create_bearer` (invocation, arg_properties)
	`do_handle_delete_bearer` (invocation, arg_bearer)
	`do_handle_enable` (invocation, arg_enable)
	`do_handle_factory_reset` (invocation, arg_code)
	`do_handle_list_bearers` (invocation)
	`do_handle_reset` (invocation)
	`do_handle_set_current_bands` (invocation, arg_bands)
	`do_handle_set_current_capabilities` (invocation, arg_capabilities)
	`do_handle_set_current_modes` (invocation, arg_modes)
	`do_handle_set_power_state` (invocation, arg_state)
	`do_state_changed` (arg_old, arg_new, arg_reason)

Properties¶

Name	Type	Flags	Short Description
`access-technologies`	`int`	r/w	AccessTechnologies
`bearers`	[`str`]	r/w	Bearers
`carrier-configuration`	`str`	r/w	CarrierConfiguration
`carrier-configuration-revision`	`str`	r/w	CarrierConfigurationRevision
`current-bands`	`GLib.Variant`	r/w	CurrentBands
`current-capabilities`	`int`	r/w	CurrentCapabilities
`current-modes`	`GLib.Variant`	r/w	CurrentModes
`device`	`str`	r/w	Device
`device-identifier`	`str`	r/w	DeviceIdentifier
`drivers`	[`str`]	r/w	Drivers
`equipment-identifier`	`str`	r/w	EquipmentIdentifier
`hardware-revision`	`str`	r/w	HardwareRevision
`manufacturer`	`str`	r/w	Manufacturer
`max-active-bearers`	`int`	r/w	MaxActiveBearers
`max-bearers`	`int`	r/w	MaxBearers
`model`	`str`	r/w	Model
`own-numbers`	[`str`]	r/w	OwnNumbers
`plugin`	`str`	r/w	Plugin
`ports`	`GLib.Variant`	r/w	Ports
`power-state`	`int`	r/w	PowerState
`primary-port`	`str`	r/w	PrimaryPort
`revision`	`str`	r/w	Revision
`signal-quality`	`GLib.Variant`	r/w	SignalQuality
`sim`	`str`	r/w	Sim
`state`	`int`	r/w	State
`state-failed-reason`	`int`	r/w	StateFailedReason
`supported-bands`	`GLib.Variant`	r/w	SupportedBands
`supported-capabilities`	`GLib.Variant`	r/w	SupportedCapabilities
`supported-ip-families`	`int`	r/w	SupportedIpFamilies
`supported-modes`	`GLib.Variant`	r/w	SupportedModes
`unlock-required`	`int`	r/w	UnlockRequired
`unlock-retries`	`GLib.Variant`	r/w	UnlockRetries

Signals¶

Name	Short Description
`handle-command`	Signal emitted when a remote caller is invoking the ‘Command() [gdbus-method-org-freedesktop-ModemManager1-Modem.Command]’ D-Bus method.
`handle-create-bearer`	Signal emitted when a remote caller is invoking the ‘CreateBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.CreateBearer]’ D-Bus method.
`handle-delete-bearer`	Signal emitted when a remote caller is invoking the ‘DeleteBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.DeleteBearer]’ D-Bus method.
`handle-enable`	Signal emitted when a remote caller is invoking the ‘Enable() [gdbus-method-org-freedesktop-ModemManager1-Modem.Enable]’ D-Bus method.
`handle-factory-reset`	Signal emitted when a remote caller is invoking the ‘FactoryReset() [gdbus-method-org-freedesktop-ModemManager1-Modem.FactoryReset]’ D-Bus method.
`handle-list-bearers`	Signal emitted when a remote caller is invoking the ‘ListBearers() [gdbus-method-org-freedesktop-ModemManager1-Modem.ListBearers]’ D-Bus method.
`handle-reset`	Signal emitted when a remote caller is invoking the ‘Reset() [gdbus-method-org-freedesktop-ModemManager1-Modem.Reset]’ D-Bus method.
`handle-set-current-bands`	Signal emitted when a remote caller is invoking the ‘SetCurrentBands() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentBands]’ D-Bus method.
`handle-set-current-capabilities`	Signal emitted when a remote caller is invoking the ‘SetCurrentCapabilities() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentCapabilities]’ D-Bus method.
`handle-set-current-modes`	Signal emitted when a remote caller is invoking the ‘SetCurrentModes() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentModes]’ D-Bus method.
`handle-set-power-state`	Signal emitted when a remote caller is invoking the ‘SetPowerState() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetPowerState]’ D-Bus method.
`state-changed`	On the client-side, this signal is emitted whenever the D-Bus signal ‘“StateChanged” [gdbus-signal-org-freedesktop-ModemManager1-Modem.StateChanged]’ is received.

Fields¶

None

Class Details¶

class ModemManager.GdbusModem¶

Bases:	`GObject.GInterface`
Structure:	`ModemManager.GdbusModemIface`

Abstract interface type for the D-Bus interface ‘org.freedesktop.ModemManager1.Modem [gdbus-interface-org-freedesktop-ModemManager1-Modem.top_of_page]’.

classmethod interface_info()¶

Returns:	A `Gio.DBusInterfaceInfo`. Do not free.
Return type:	`Gio.DBusInterfaceInfo`

Gets a machine-readable description of the ‘org.freedesktop.ModemManager1.Modem [gdbus-interface-org-freedesktop-ModemManager1-Modem.top_of_page]’ D-Bus interface.

classmethod override_properties(klass, property_id_begin)¶

Parameters:	klass (`GObject.ObjectClass`) – The class structure for a `GObject.Object` derived class. property_id_begin (`int`) – The property id to assign to the first overridden property.
Returns:	The last property id.
Return type:	`int`

Overrides all GObject.Object properties in the ModemManager.GdbusModem interface for a concrete class. The properties are overridden in the order they are defined.

call_command(arg_cmd, arg_timeout, cancellable, callback, *user_data)¶

Parameters:

arg_cmd (str) – Argument to pass with the method invocation.
arg_timeout (int) – Argument to pass with the method invocation.
cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.
callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.
user_data (object or None) – User data to pass to callback.

Asynchronously invokes the ‘Command() [gdbus-method-org-freedesktop-ModemManager1-Modem.Command]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_command_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_command_sync() for the synchronous, blocking version of this method.

call_command_finish(res)¶

Parameters: res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to ModemManager.GdbusModem.call_command().

Raises: GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_response:	Return location for return parameter or `None` to ignore.

Return type: (bool, out_response: str)

Finishes an operation started with ModemManager.GdbusModem.call_command().

call_command_sync(arg_cmd, arg_timeout, cancellable)¶

Parameters:

arg_cmd (str) – Argument to pass with the method invocation.
arg_timeout (int) – Argument to pass with the method invocation.
cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_response:	Return location for return parameter or `None` to ignore.

Return type:

(bool, out_response: str)

Synchronously invokes the ‘Command() [gdbus-method-org-freedesktop-ModemManager1-Modem.Command]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_command() for the asynchronous version of this method.

call_create_bearer(arg_properties, cancellable, callback, *user_data)¶

Parameters:	arg_properties (`GLib.Variant`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘CreateBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.CreateBearer]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_create_bearer_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_create_bearer_sync() for the synchronous, blocking version of this method.

call_create_bearer_finish(res)¶

Parameters: res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to ModemManager.GdbusModem.call_create_bearer().

Raises: GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_path:	Return location for return parameter or `None` to ignore.

Return type: (bool, out_path: str)

Finishes an operation started with ModemManager.GdbusModem.call_create_bearer().

call_create_bearer_sync(arg_properties, cancellable)¶

Parameters:

arg_properties (GLib.Variant) – Argument to pass with the method invocation.
cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_path:	Return location for return parameter or `None` to ignore.

Return type:

(bool, out_path: str)

Synchronously invokes the ‘CreateBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.CreateBearer]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_create_bearer() for the asynchronous version of this method.

call_delete_bearer(arg_bearer, cancellable, callback, *user_data)¶

Parameters:	arg_bearer (`str`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘DeleteBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.DeleteBearer]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_delete_bearer_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_delete_bearer_sync() for the synchronous, blocking version of this method.

call_delete_bearer_finish(res)¶

Parameters:	res (`Gio.AsyncResult`) – The `Gio.AsyncResult` obtained from the `Gio.AsyncReadyCallback` passed to `ModemManager.GdbusModem.call_delete_bearer`().
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Finishes an operation started with ModemManager.GdbusModem.call_delete_bearer().

call_delete_bearer_sync(arg_bearer, cancellable)¶

Parameters:	arg_bearer (`str`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`.
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Synchronously invokes the ‘DeleteBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.DeleteBearer]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_delete_bearer() for the asynchronous version of this method.

call_enable(arg_enable, cancellable, callback, *user_data)¶

Parameters:	arg_enable (`bool`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘Enable() [gdbus-method-org-freedesktop-ModemManager1-Modem.Enable]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_enable_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_enable_sync() for the synchronous, blocking version of this method.

call_enable_finish(res)¶

Parameters:	res (`Gio.AsyncResult`) – The `Gio.AsyncResult` obtained from the `Gio.AsyncReadyCallback` passed to `ModemManager.GdbusModem.call_enable`().
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Finishes an operation started with ModemManager.GdbusModem.call_enable().

call_enable_sync(arg_enable, cancellable)¶

Parameters:	arg_enable (`bool`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`.
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Synchronously invokes the ‘Enable() [gdbus-method-org-freedesktop-ModemManager1-Modem.Enable]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_enable() for the asynchronous version of this method.

call_factory_reset(arg_code, cancellable, callback, *user_data)¶

Parameters:	arg_code (`str`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘FactoryReset() [gdbus-method-org-freedesktop-ModemManager1-Modem.FactoryReset]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_factory_reset_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_factory_reset_sync() for the synchronous, blocking version of this method.

call_factory_reset_finish(res)¶

Parameters:	res (`Gio.AsyncResult`) – The `Gio.AsyncResult` obtained from the `Gio.AsyncReadyCallback` passed to `ModemManager.GdbusModem.call_factory_reset`().
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Finishes an operation started with ModemManager.GdbusModem.call_factory_reset().

call_factory_reset_sync(arg_code, cancellable)¶

Parameters:	arg_code (`str`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`.
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Synchronously invokes the ‘FactoryReset() [gdbus-method-org-freedesktop-ModemManager1-Modem.FactoryReset]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_factory_reset() for the asynchronous version of this method.

call_list_bearers(cancellable, callback, *user_data)¶

Parameters:	cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘ListBearers() [gdbus-method-org-freedesktop-ModemManager1-Modem.ListBearers]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_list_bearers_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_list_bearers_sync() for the synchronous, blocking version of this method.

call_list_bearers_finish(res)¶

Parameters: res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to ModemManager.GdbusModem.call_list_bearers().

Raises: GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_bearers:	Return location for return parameter or `None` to ignore.

Return type: (bool, out_bearers: [str])

Finishes an operation started with ModemManager.GdbusModem.call_list_bearers().

call_list_bearers_sync(cancellable)¶

Parameters: cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises: GLib.Error

Returns:

True if the call succeeded, False if error is set.

out_bearers:	Return location for return parameter or `None` to ignore.

Return type: (bool, out_bearers: [str])

Synchronously invokes the ‘ListBearers() [gdbus-method-org-freedesktop-ModemManager1-Modem.ListBearers]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_list_bearers() for the asynchronous version of this method.

call_reset(cancellable, callback, *user_data)¶

Parameters:	cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘Reset() [gdbus-method-org-freedesktop-ModemManager1-Modem.Reset]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_reset_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_reset_sync() for the synchronous, blocking version of this method.

call_reset_finish(res)¶

Parameters:	res (`Gio.AsyncResult`) – The `Gio.AsyncResult` obtained from the `Gio.AsyncReadyCallback` passed to `ModemManager.GdbusModem.call_reset`().
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Finishes an operation started with ModemManager.GdbusModem.call_reset().

call_reset_sync(cancellable)¶

Parameters:	cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`.
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Synchronously invokes the ‘Reset() [gdbus-method-org-freedesktop-ModemManager1-Modem.Reset]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_reset() for the asynchronous version of this method.

call_set_current_bands(arg_bands, cancellable, callback, *user_data)¶

Parameters:	arg_bands (`GLib.Variant`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘SetCurrentBands() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentBands]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_set_current_bands_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_set_current_bands_sync() for the synchronous, blocking version of this method.

call_set_current_bands_finish(res)¶

Parameters:	res (`Gio.AsyncResult`) – The `Gio.AsyncResult` obtained from the `Gio.AsyncReadyCallback` passed to `ModemManager.GdbusModem.call_set_current_bands`().
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Finishes an operation started with ModemManager.GdbusModem.call_set_current_bands().

call_set_current_bands_sync(arg_bands, cancellable)¶

Parameters:	arg_bands (`GLib.Variant`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`.
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Synchronously invokes the ‘SetCurrentBands() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentBands]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_set_current_bands() for the asynchronous version of this method.

call_set_current_capabilities(arg_capabilities, cancellable, callback, *user_data)¶

Parameters:	arg_capabilities (`int`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘SetCurrentCapabilities() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentCapabilities]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_set_current_capabilities_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_set_current_capabilities_sync() for the synchronous, blocking version of this method.

call_set_current_capabilities_finish(res)¶

Parameters:	res (`Gio.AsyncResult`) – The `Gio.AsyncResult` obtained from the `Gio.AsyncReadyCallback` passed to `ModemManager.GdbusModem.call_set_current_capabilities`().
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Finishes an operation started with ModemManager.GdbusModem.call_set_current_capabilities().

call_set_current_capabilities_sync(arg_capabilities, cancellable)¶

Parameters:	arg_capabilities (`int`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`.
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Synchronously invokes the ‘SetCurrentCapabilities() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentCapabilities]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_set_current_capabilities() for the asynchronous version of this method.

call_set_current_modes(arg_modes, cancellable, callback, *user_data)¶

Parameters:	arg_modes (`GLib.Variant`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘SetCurrentModes() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentModes]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_set_current_modes_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_set_current_modes_sync() for the synchronous, blocking version of this method.

call_set_current_modes_finish(res)¶

Parameters:	res (`Gio.AsyncResult`) – The `Gio.AsyncResult` obtained from the `Gio.AsyncReadyCallback` passed to `ModemManager.GdbusModem.call_set_current_modes`().
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Finishes an operation started with ModemManager.GdbusModem.call_set_current_modes().

call_set_current_modes_sync(arg_modes, cancellable)¶

Parameters:	arg_modes (`GLib.Variant`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`.
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Synchronously invokes the ‘SetCurrentModes() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentModes]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_set_current_modes() for the asynchronous version of this method.

call_set_power_state(arg_state, cancellable, callback, *user_data)¶

Parameters:	arg_state (`int`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`. callback (`Gio.AsyncReadyCallback` or `None`) – A `Gio.AsyncReadyCallback` to call when the request is satisfied or `None`. user_data (`object` or `None`) – User data to pass to callback.

Asynchronously invokes the ‘SetPowerState() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetPowerState]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModem.call_set_power_state_finish() to get the result of the operation.

See ModemManager.GdbusModem.call_set_power_state_sync() for the synchronous, blocking version of this method.

call_set_power_state_finish(res)¶

Parameters:	res (`Gio.AsyncResult`) – The `Gio.AsyncResult` obtained from the `Gio.AsyncReadyCallback` passed to `ModemManager.GdbusModem.call_set_power_state`().
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Finishes an operation started with ModemManager.GdbusModem.call_set_power_state().

call_set_power_state_sync(arg_state, cancellable)¶

Parameters:	arg_state (`int`) – Argument to pass with the method invocation. cancellable (`Gio.Cancellable` or `None`) – A `Gio.Cancellable` or `None`.
Raises:	`GLib.Error`
Returns:	`True` if the call succeeded, `False` if error is set.
Return type:	`bool`

Synchronously invokes the ‘SetPowerState() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetPowerState]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModem.call_set_power_state() for the asynchronous version of this method.

complete_command(invocation, response)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. response (`str`) – Parameter to return.

Helper function used in service implementations to finish handling invocations of the ‘Command() [gdbus-method-org-freedesktop-ModemManager1-Modem.Command]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_create_bearer(invocation, path)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. path (`str`) – Parameter to return.

Helper function used in service implementations to finish handling invocations of the ‘CreateBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.CreateBearer]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_delete_bearer(invocation)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.

Helper function used in service implementations to finish handling invocations of the ‘DeleteBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.DeleteBearer]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_enable(invocation)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.

Helper function used in service implementations to finish handling invocations of the ‘Enable() [gdbus-method-org-freedesktop-ModemManager1-Modem.Enable]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_factory_reset(invocation)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.

Helper function used in service implementations to finish handling invocations of the ‘FactoryReset() [gdbus-method-org-freedesktop-ModemManager1-Modem.FactoryReset]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_list_bearers(invocation, bearers)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. bearers (`str`) – Parameter to return.

Helper function used in service implementations to finish handling invocations of the ‘ListBearers() [gdbus-method-org-freedesktop-ModemManager1-Modem.ListBearers]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_reset(invocation)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.

Helper function used in service implementations to finish handling invocations of the ‘Reset() [gdbus-method-org-freedesktop-ModemManager1-Modem.Reset]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_set_current_bands(invocation)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.

Helper function used in service implementations to finish handling invocations of the ‘SetCurrentBands() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentBands]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_set_current_capabilities(invocation)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.

Helper function used in service implementations to finish handling invocations of the ‘SetCurrentCapabilities() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentCapabilities]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_set_current_modes(invocation)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.

Helper function used in service implementations to finish handling invocations of the ‘SetCurrentModes() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentModes]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_set_power_state(invocation)¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.

Helper function used in service implementations to finish handling invocations of the ‘SetPowerState() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetPowerState]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

emit_state_changed(arg_old, arg_new, arg_reason)¶

Parameters:	arg_old (`int`) – Argument to pass with the signal. arg_new (`int`) – Argument to pass with the signal. arg_reason (`int`) – Argument to pass with the signal.

Emits the ‘“StateChanged” [gdbus-signal-org-freedesktop-ModemManager1-Modem.StateChanged]’ D-Bus signal.

do_handle_command(invocation, arg_cmd, arg_timeout) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_cmd (`str`) – arg_timeout (`int`) –
Return type:	`bool`

do_handle_create_bearer(invocation, arg_properties) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_properties (`GLib.Variant`) –
Return type:	`bool`

do_handle_delete_bearer(invocation, arg_bearer) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_bearer (`str`) –
Return type:	`bool`

do_handle_enable(invocation, arg_enable) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_enable (`bool`) –
Return type:	`bool`

do_handle_factory_reset(invocation, arg_code) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_code (`str`) –
Return type:	`bool`

do_handle_list_bearers(invocation) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) –
Return type:	`bool`

do_handle_reset(invocation) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) –
Return type:	`bool`

do_handle_set_current_bands(invocation, arg_bands) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_bands (`GLib.Variant`) –
Return type:	`bool`

do_handle_set_current_capabilities(invocation, arg_capabilities) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_capabilities (`int`) –
Return type:	`bool`

do_handle_set_current_modes(invocation, arg_modes) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_modes (`GLib.Variant`) –
Return type:	`bool`

do_handle_set_power_state(invocation, arg_state) virtual¶

Parameters:	invocation (`Gio.DBusMethodInvocation`) – arg_state (`int`) –
Return type:	`bool`

do_state_changed(arg_old, arg_new, arg_reason) virtual¶

Parameters:	arg_old (`int`) – arg_new (`int`) – arg_reason (`int`) –

Signal Details¶

ModemManager.GdbusModem.signals.handle_command(gdbus_modem, invocation, arg_cmd, arg_timeout)¶

Signal Name:	`handle-command`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_cmd (`str`) – Argument passed by remote caller. arg_timeout (`int`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘Command() [gdbus-method-org-freedesktop-ModemManager1-Modem.Command]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_command() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_create_bearer(gdbus_modem, invocation, arg_properties)¶

Signal Name:	`handle-create-bearer`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_properties (`GLib.Variant`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘CreateBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.CreateBearer]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_create_bearer() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_delete_bearer(gdbus_modem, invocation, arg_bearer)¶

Signal Name:	`handle-delete-bearer`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_bearer (`str`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘DeleteBearer() [gdbus-method-org-freedesktop-ModemManager1-Modem.DeleteBearer]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_delete_bearer() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_enable(gdbus_modem, invocation, arg_enable)¶

Signal Name:	`handle-enable`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_enable (`bool`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘Enable() [gdbus-method-org-freedesktop-ModemManager1-Modem.Enable]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_enable() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_factory_reset(gdbus_modem, invocation, arg_code)¶

Signal Name:	`handle-factory-reset`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_code (`str`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘FactoryReset() [gdbus-method-org-freedesktop-ModemManager1-Modem.FactoryReset]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_factory_reset() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_list_bearers(gdbus_modem, invocation)¶

Signal Name:	`handle-list-bearers`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘ListBearers() [gdbus-method-org-freedesktop-ModemManager1-Modem.ListBearers]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_list_bearers() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_reset(gdbus_modem, invocation)¶

Signal Name:	`handle-reset`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘Reset() [gdbus-method-org-freedesktop-ModemManager1-Modem.Reset]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_reset() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_set_current_bands(gdbus_modem, invocation, arg_bands)¶

Signal Name:	`handle-set-current-bands`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_bands (`GLib.Variant`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘SetCurrentBands() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentBands]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_set_current_bands() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_set_current_capabilities(gdbus_modem, invocation, arg_capabilities)¶

Signal Name:	`handle-set-current-capabilities`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_capabilities (`int`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘SetCurrentCapabilities() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentCapabilities]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_set_current_capabilities() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_set_current_modes(gdbus_modem, invocation, arg_modes)¶

Signal Name:	`handle-set-current-modes`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_modes (`GLib.Variant`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘SetCurrentModes() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetCurrentModes]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_set_current_modes() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.handle_set_power_state(gdbus_modem, invocation, arg_state)¶

Signal Name:	`handle-set-power-state`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal invocation (`Gio.DBusMethodInvocation`) – A `Gio.DBusMethodInvocation`. arg_state (`int`) – Argument passed by remote caller.
Returns:	`True` if the invocation was handled, `False` to let other signal handlers run.
Return type:	`bool`

Signal emitted when a remote caller is invoking the ‘SetPowerState() [gdbus-method-org-freedesktop-ModemManager1-Modem.SetPowerState]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModem.complete_set_power_state() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModem.signals.state_changed(gdbus_modem, arg_old, arg_new, arg_reason)¶

Signal Name:	`state-changed`
Flags:	`RUN_LAST`
Parameters:	gdbus_modem (`ModemManager.GdbusModem`) – The object which received the signal arg_old (`int`) – Argument. arg_new (`int`) – Argument. arg_reason (`int`) – Argument.

On the client-side, this signal is emitted whenever the D-Bus signal ‘“StateChanged” [gdbus-signal-org-freedesktop-ModemManager1-Modem.StateChanged]’ is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Property Details¶

ModemManager.GdbusModem.props.access_technologies¶

Name:	`access-technologies`
Type:	`int`
Default Value:	`0`
Flags:	`READABLE`, `WRITABLE`

Represents the D-Bus property ‘“AccessTechnologies” [gdbus-property-org-freedesktop-ModemManager1-Modem.AccessTechnologies]’.