ModemManager.GdbusModemLocation

Implementations:  ModemManager.GdbusModemLocationProxy, ModemManager.GdbusModemLocationSkeleton

Methods

class	interface_info ()
class	override_properties (klass, property_id_begin)
	call_get_location (cancellable, callback, *user_data)
	call_get_location_finish (res)
	call_get_location_sync (cancellable)
	call_inject_assistance_data (arg_data, cancellable, callback, *user_data)
	call_inject_assistance_data_finish (res)
	call_inject_assistance_data_sync (arg_data, cancellable)
	call_set_gps_refresh_rate (arg_rate, cancellable, callback, *user_data)
	call_set_gps_refresh_rate_finish (res)
	call_set_gps_refresh_rate_sync (arg_rate, cancellable)
	call_set_supl_server (arg_supl, cancellable, callback, *user_data)
	call_set_supl_server_finish (res)
	call_set_supl_server_sync (arg_supl, cancellable)
	call_setup (arg_sources, arg_signal_location, cancellable, callback, *user_data)
	call_setup_finish (res)
	call_setup_sync (arg_sources, arg_signal_location, cancellable)
	complete_get_location (invocation, Location)
	complete_inject_assistance_data (invocation)
	complete_set_gps_refresh_rate (invocation)
	complete_set_supl_server (invocation)
	complete_setup (invocation)

Virtual Methods

	do_handle_get_location (invocation)
	do_handle_inject_assistance_data (invocation, arg_data)
	do_handle_set_gps_refresh_rate (invocation, arg_rate)
	do_handle_set_supl_server (invocation, arg_supl)
	do_handle_setup (invocation, arg_sources, arg_signal_location)

Properties

Name	Type	Flags	Short Description
assistance-data-servers	[str]	r/w	AssistanceDataServers
capabilities	int	r/w	Capabilities
enabled	int	r/w	Enabled
gps-refresh-rate	int	r/w	GpsRefreshRate
location	GLib.Variant	r/w	Location
signals-location	bool	r/w	SignalsLocation
supl-server	str	r/w	SuplServer
supported-assistance-data	int	r/w	SupportedAssistanceData

Signals

Name	Short Description
handle-get-location	Signal emitted when a remote caller is invoking the ‘GetLocation() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.GetLocation]’ D-Bus method.
handle-inject-assistance-data	Signal emitted when a remote caller is invoking the ‘InjectAssistanceData() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.InjectAssistanceData]’ D-Bus method.
handle-set-gps-refresh-rate	Signal emitted when a remote caller is invoking the ‘SetGpsRefreshRate() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetGpsRefreshRate]’ D-Bus method.
handle-set-supl-server	Signal emitted when a remote caller is invoking the ‘SetSuplServer() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetSuplServer]’ D-Bus method.
handle-setup	Signal emitted when a remote caller is invoking the ‘Setup() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.Setup]’ D-Bus method.

Fields

None

Class Details

class ModemManager.GdbusModemLocation

Bases:GObject.GInterface Structure:ModemManager.GdbusModemLocationIface

Abstract interface type for the D-Bus interface ‘org.freedesktop.ModemManager1.Modem.Location [gdbus-interface-org-freedesktop-ModemManager1-Modem-Location.top_of_page]’.

classmethod interface_info()

Returns:A Gio.DBusInterfaceInfo. Do not free. Return type:Gio.DBusInterfaceInfo

Gets a machine-readable description of the ‘org.freedesktop.ModemManager1.Modem.Location [gdbus-interface-org-freedesktop-ModemManager1-Modem-Location.top_of_page]’ D-Bus interface.

classmethod override_properties(klass, property_id_begin)

Parameters:

• klass (GObject.ObjectClass) – The class structure for a GObject.Object derived class.
• property_id_begin (int) – The property id to assign to the first overridden property.

Returns:

The last property id.

Return type:

int

Overrides all GObject.Object properties in the ModemManager.GdbusModemLocation interface for a concrete class. The properties are overridden in the order they are defined.

call_get_location(cancellable, callback, *user_data)

Parameters:

• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.
• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.
• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the ‘GetLocation() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.GetLocation]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModemLocation.call_get_location_finish() to get the result of the operation.

See ModemManager.GdbusModemLocation.call_get_location_sync() for the synchronous, blocking version of this method.

call_get_location_finish(res)

Parameters:res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to ModemManager.GdbusModemLocation.call_get_location(). Raises:GLib.Error Returns:True if the call succeeded, False if error is set.

out_Location:Return location for return parameter or None to ignore.

Return type:(bool, out_Location: GLib.Variant)

Finishes an operation started with ModemManager.GdbusModemLocation.call_get_location().

call_get_location_sync(cancellable)

Parameters:cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None. Raises:GLib.Error Returns:True if the call succeeded, False if error is set.

out_Location:Return location for return parameter or None to ignore.

Return type:(bool, out_Location: GLib.Variant)

Synchronously invokes the ‘GetLocation() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.GetLocation]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModemLocation.call_get_location() for the asynchronous version of this method.

call_inject_assistance_data(arg_data, cancellable, callback, *user_data)

Parameters:

• arg_data (GLib.Variant) – Argument to pass with the method invocation.
• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.
• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.
• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the ‘InjectAssistanceData() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.InjectAssistanceData]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModemLocation.call_inject_assistance_data_finish() to get the result of the operation.

See ModemManager.GdbusModemLocation.call_inject_assistance_data_sync() for the synchronous, blocking version of this method.

call_inject_assistance_data_finish(res)

Parameters:res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to ModemManager.GdbusModemLocation.call_inject_assistance_data(). Raises:GLib.Error Returns:True if the call succeeded, False if error is set. Return type:bool

Finishes an operation started with ModemManager.GdbusModemLocation.call_inject_assistance_data().

call_inject_assistance_data_sync(arg_data, cancellable)

Parameters:

• arg_data (GLib.Variant) – Argument to pass with the method invocation.
• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the ‘InjectAssistanceData() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.InjectAssistanceData]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModemLocation.call_inject_assistance_data() for the asynchronous version of this method.

call_set_gps_refresh_rate(arg_rate, cancellable, callback, *user_data)

Parameters:

• arg_rate (int) – Argument to pass with the method invocation.
• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.
• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.
• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the ‘SetGpsRefreshRate() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetGpsRefreshRate]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModemLocation.call_set_gps_refresh_rate_finish() to get the result of the operation.

See ModemManager.GdbusModemLocation.call_set_gps_refresh_rate_sync() for the synchronous, blocking version of this method.

call_set_gps_refresh_rate_finish(res)

Parameters:res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to ModemManager.GdbusModemLocation.call_set_gps_refresh_rate(). Raises:GLib.Error Returns:True if the call succeeded, False if error is set. Return type:bool

Finishes an operation started with ModemManager.GdbusModemLocation.call_set_gps_refresh_rate().

call_set_gps_refresh_rate_sync(arg_rate, cancellable)

Parameters:

• arg_rate (int) – Argument to pass with the method invocation.
• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the ‘SetGpsRefreshRate() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetGpsRefreshRate]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModemLocation.call_set_gps_refresh_rate() for the asynchronous version of this method.

call_set_supl_server(arg_supl, cancellable, callback, *user_data)

Parameters:

• arg_supl (str) – Argument to pass with the method invocation.
• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.
• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.
• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the ‘SetSuplServer() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetSuplServer]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModemLocation.call_set_supl_server_finish() to get the result of the operation.

See ModemManager.GdbusModemLocation.call_set_supl_server_sync() for the synchronous, blocking version of this method.

call_set_supl_server_finish(res)

Parameters:res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to ModemManager.GdbusModemLocation.call_set_supl_server(). Raises:GLib.Error Returns:True if the call succeeded, False if error is set. Return type:bool

Finishes an operation started with ModemManager.GdbusModemLocation.call_set_supl_server().

call_set_supl_server_sync(arg_supl, cancellable)

Parameters:

• arg_supl (str) – Argument to pass with the method invocation.
• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the ‘SetSuplServer() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetSuplServer]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModemLocation.call_set_supl_server() for the asynchronous version of this method.

call_setup(arg_sources, arg_signal_location, cancellable, callback, *user_data)

Parameters:

• arg_sources (int) – Argument to pass with the method invocation.
• arg_signal_location (bool) – Argument to pass with the method invocation.
• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.
• callback (Gio.AsyncReadyCallback or None) – A Gio.AsyncReadyCallback to call when the request is satisfied or None.
• user_data (object or None) – User data to pass to callback.

Asynchronously invokes the ‘Setup() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.Setup]’ D-Bus method on self. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see GLib.MainContext.push_thread_default()). You can then call ModemManager.GdbusModemLocation.call_setup_finish() to get the result of the operation.

See ModemManager.GdbusModemLocation.call_setup_sync() for the synchronous, blocking version of this method.

call_setup_finish(res)

Parameters:res (Gio.AsyncResult) – The Gio.AsyncResult obtained from the Gio.AsyncReadyCallback passed to ModemManager.GdbusModemLocation.call_setup(). Raises:GLib.Error Returns:True if the call succeeded, False if error is set. Return type:bool

Finishes an operation started with ModemManager.GdbusModemLocation.call_setup().

call_setup_sync(arg_sources, arg_signal_location, cancellable)

Parameters:

• arg_sources (int) – Argument to pass with the method invocation.
• arg_signal_location (bool) – Argument to pass with the method invocation.
• cancellable (Gio.Cancellable or None) – A Gio.Cancellable or None.

Raises:

GLib.Error

Returns:

True if the call succeeded, False if error is set.

Return type:

bool

Synchronously invokes the ‘Setup() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.Setup]’ D-Bus method on self. The calling thread is blocked until a reply is received.

See ModemManager.GdbusModemLocation.call_setup() for the asynchronous version of this method.

complete_get_location(invocation, Location)

Parameters:

• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.
• Location (GLib.Variant) – Parameter to return.

Helper function used in service implementations to finish handling invocations of the ‘GetLocation() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.GetLocation]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_inject_assistance_data(invocation)

Parameters:invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the ‘InjectAssistanceData() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.InjectAssistanceData]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_set_gps_refresh_rate(invocation)

Parameters:invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the ‘SetGpsRefreshRate() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetGpsRefreshRate]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_set_supl_server(invocation)

Parameters:invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the ‘SetSuplServer() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetSuplServer]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

complete_setup(invocation)

Parameters:invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Helper function used in service implementations to finish handling invocations of the ‘Setup() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.Setup]’ D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation, you cannot use it afterwards.

do_handle_get_location(invocation) virtual

Parameters:invocation (Gio.DBusMethodInvocation) – Return type:bool

do_handle_inject_assistance_data(invocation, arg_data) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –
• arg_data (GLib.Variant) –

Return type:

bool

do_handle_set_gps_refresh_rate(invocation, arg_rate) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –
• arg_rate (int) –

Return type:

bool

do_handle_set_supl_server(invocation, arg_supl) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –
• arg_supl (str) –

Return type:

bool

do_handle_setup(invocation, arg_sources, arg_signal_location) virtual

Parameters:

• invocation (Gio.DBusMethodInvocation) –
• arg_sources (int) –
• arg_signal_location (bool) –

Return type:

bool

Signal Details

ModemManager.GdbusModemLocation.signals.handle_get_location(gdbus_modem_location, invocation)

Signal Name:

handle-get-location

Flags:

RUN_LAST

Parameters:

• gdbus_modem_location (ModemManager.GdbusModemLocation) – The object which received the signal
• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.

Returns:

True if the invocation was handled, False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the ‘GetLocation() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.GetLocation]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModemLocation.complete_get_location() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModemLocation.signals.handle_inject_assistance_data(gdbus_modem_location, invocation, arg_data)

Signal Name:

handle-inject-assistance-data

Flags:

RUN_LAST

Parameters:

• gdbus_modem_location (ModemManager.GdbusModemLocation) – The object which received the signal
• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.
• arg_data (GLib.Variant) – Argument passed by remote caller.

Returns:

True if the invocation was handled, False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the ‘InjectAssistanceData() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.InjectAssistanceData]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModemLocation.complete_inject_assistance_data() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModemLocation.signals.handle_set_gps_refresh_rate(gdbus_modem_location, invocation, arg_rate)

Signal Name:

handle-set-gps-refresh-rate

Flags:

RUN_LAST

Parameters:

• gdbus_modem_location (ModemManager.GdbusModemLocation) – The object which received the signal
• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.
• arg_rate (int) – Argument passed by remote caller.

Returns:

True if the invocation was handled, False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the ‘SetGpsRefreshRate() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetGpsRefreshRate]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModemLocation.complete_set_gps_refresh_rate() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModemLocation.signals.handle_set_supl_server(gdbus_modem_location, invocation, arg_supl)

Signal Name:

handle-set-supl-server

Flags:

RUN_LAST

Parameters:

• gdbus_modem_location (ModemManager.GdbusModemLocation) – The object which received the signal
• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.
• arg_supl (str) – Argument passed by remote caller.

Returns:

True if the invocation was handled, False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the ‘SetSuplServer() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.SetSuplServer]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModemLocation.complete_set_supl_server() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

ModemManager.GdbusModemLocation.signals.handle_setup(gdbus_modem_location, invocation, arg_sources, arg_signal_location)

Signal Name:

handle-setup

Flags:

RUN_LAST

Parameters:

• gdbus_modem_location (ModemManager.GdbusModemLocation) – The object which received the signal
• invocation (Gio.DBusMethodInvocation) – A Gio.DBusMethodInvocation.
• arg_sources (int) – Argument passed by remote caller.
• arg_signal_location (bool) – Argument passed by remote caller.

Returns:

True if the invocation was handled, False to let other signal handlers run.

Return type:

bool

Signal emitted when a remote caller is invoking the ‘Setup() [gdbus-method-org-freedesktop-ModemManager1-Modem-Location.Setup]’ D-Bus method.

If a signal handler returns True, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call ModemManager.GdbusModemLocation.complete_setup() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the Gio.DBusError.UNKNOWN_METHOD error is returned.

Property Details

ModemManager.GdbusModemLocation.props.assistance_data_servers

Name:assistance-data-servers Type:[str] Default Value:[] Flags:READABLE, WRITABLE

Represents the D-Bus property ‘“AssistanceDataServers” [gdbus-property-org-freedesktop-ModemManager1-Modem-Location.AssistanceDataServers]’.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

ModemManager.GdbusModemLocation.props.capabilities

Name:capabilities Type:int Default Value:0 Flags:READABLE, WRITABLE

Represents the D-Bus property ‘“Capabilities” [gdbus-property-org-freedesktop-ModemManager1-Modem-Location.Capabilities]’.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

ModemManager.GdbusModemLocation.props.enabled

Name:enabled Type:int Default Value:0 Flags:READABLE, WRITABLE

Represents the D-Bus property ‘“Enabled” [gdbus-property-org-freedesktop-ModemManager1-Modem-Location.Enabled]’.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

ModemManager.GdbusModemLocation.props.gps_refresh_rate

Name:gps-refresh-rate Type:int Default Value:0 Flags:READABLE, WRITABLE

Represents the D-Bus property ‘“GpsRefreshRate” [gdbus-property-org-freedesktop-ModemManager1-Modem-Location.GpsRefreshRate]’.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

ModemManager.GdbusModemLocation.props.location

Name:location Type:GLib.Variant Default Value:None Flags:READABLE, WRITABLE

Represents the D-Bus property ‘“Location” [gdbus-property-org-freedesktop-ModemManager1-Modem-Location.Location]’.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

ModemManager.GdbusModemLocation.props.signals_location

Name:signals-location Type:bool Default Value:False Flags:READABLE, WRITABLE

Represents the D-Bus property ‘“SignalsLocation” [gdbus-property-org-freedesktop-ModemManager1-Modem-Location.SignalsLocation]’.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

ModemManager.GdbusModemLocation.props.supl_server

Name:supl-server Type:str Default Value:None Flags:READABLE, WRITABLE

Represents the D-Bus property ‘“SuplServer” [gdbus-property-org-freedesktop-ModemManager1-Modem-Location.SuplServer]’.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

ModemManager.GdbusModemLocation.props.supported_assistance_data

Name:supported-assistance-data Type:int Default Value:0 Flags:READABLE, WRITABLE

Represents the D-Bus property ‘“SupportedAssistanceData” [gdbus-property-org-freedesktop-ModemManager1-Modem-Location.SupportedAssistanceData]’.

Since the D-Bus property for this GObject.Object property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.